Display and controls
Smart double-pole thermosts for electric heating
TH1500RF
Display and controls
Smart double-pole thermosts for electric heating
TH1500RF
État de connexion avec la passerelle
Heure
Affichage secondaire : Température extérieure (Out)
Température ambiante
↑
↓
Changing settings from the device
To change the temperature settings you must:
1
Lower the setpoint temperature to its minimum and keep the 
pressed for 10 seconds to access the menu.
2
Press the or 
buttons to change the setting.
3
Press the and buttons simultaneously to select the next parameter. Continue to press until the end of the list to exit the menu.
Settings that can be changed from the device
# | Name | Parameters & settings |
| 1 | Temp | Temperature format °C or °F – (default: °C) |
| 2 | Min | Minimum setpoint 5 °C to 30 °C – (default: 5 °C) |
| 3 | Max | Maximum setpoint 5 °C to 30 °C – (default: 30 °C) |
| 4 | BL | Backlight control ON/OFF (default: ON) |
| 5 | Load | Load current 0 A to 15 A (1) |
| 6 | Load | Load power 0 W to 4155 W (2) |
1) Lorad current
Reading of the load current, featured in amperes.
2) Puissance de la charge
Reading of the load power connected to the thermostat, featured in watts.
Look for more topics
Add your smart double-pole thermostat to your gateway.
You can now move on to configuring your thermostat with your gateway to get more functionality.
You will find below the most common issues you may encounter.
If you still need help, contact Sinopé technical support.
Install a thermostat myself (DIY)
Difference between a single-pole thermostat and a double-pole thermostat
Calculate the thermostat wattage required to control your electric heaters
Difference between TRIAC and relay switching
Installation of the thermostat with multiple heating devices in the same room
Installation of a wire connector