Display and controls

Programmable electric heating thermostat
TH1120P-3000

Display and controls

Programmable electric heating thermostat
TH1120P-3000

Heure
Température ambiante
Affichage secondaire : Température de consigne (Set)
Indicateur de chauffage

Configure the date and time

To configure the date and time on your thermostat, you must:

1

Press the « Time » button to access the setting mode.

2

Press the or button to change the value of the flashing parameter.
 

3

Press the « Next » button to select the following parameters which must be modified.

Configure the operating mode

Press the « Mode » button to select the operating mode (ECONO, AUTO or MAN)

ECONO

This mode is used to turn off the heating during the summer period or during a period of extended absence. The Econo setpoint can be modified according to the user’s needs (by default 5 ° C).

AUTO

The thermostat automatically changes the setpoint temperature according to the schedule you have programmed. Changing the setpoint in AUTO mode will temporarily bypass the program. This will automatically return to the schedule during the next scheduled period.

MAN

Les changements de la température de consigne doivent être effectués manuellement.

Program your thermostat

Follow the steps to program your thermostat

1

Press the « prog » button for 3 seconds to enter programming mode. Period # 1 (P1) for Monday (MO) will appear on the screen.

2

Use the « prog » button to scroll through the periods of the day (P1 to P4).

3

Use the « next » button to select the parameter you wish to modify. The active setting will flash indicating that it can be changed by pressing the or button.

4

Use the or button to modify the selected parameter

5

Use the « clear » button to erase the selected period.

Tips: In programming mode, press the « clear » button for 3 seconds to erase all programs. Then you can enter the programs from P1 to P4 for the 7 days at the same time.

You will need to exit programming mode and re-enter it if you wish to make schedule changes for certain days. (Ex .: Delete P2 and P3 for Saturday and Sunday).

6

Press the « prog » button for 3 seconds to exit programming mode.

The thermostat is pre-programmed according to the following schedule:

Monday to FridaySaturday and Sunday
P16h0021°P16h0021°
P28h0017°P2 
P318h0021°P3 
P422h0017°P422h0017°

The thermostat is pre-programmed according to the following schedule:

Monday to Friday
P16h0021°
P28h0017°
P318h0021°
P422h0017°
Saturday and Sunday
P16h0021°
P2 
P3 
P422h0017°

Changing advanced settings on the device

To change the advanced settings of your thermostat, you must:

1

Press the « Mode » button for 3 seconds to access the menu.

2

Use the or button to change the setting

3

Press the « next » button to select the parameter.

4

Press the « Mode » button to exit the menu and return to the normal display.

Advanced settings

Order

Parameters & settings
1

Temperature format

°C or °F

Time format

24 h or 12h – (default: 12h)

3

Backlight

OFF (active for 6 sec if a button is pressed) 

ON (always active)

(default: OFF)

4

Automatic Daylight Saving Time*

OFF/ON – (default: ON) (1)

5

Early Start

OFF/ON – (default: OFF) (2)

6

Control Cycle

SHR (short cycle for electric baseboard)

FAN (long cycle for fan-forced heat)

1) When Automatic Daylight Saving Time is enabled (ON), the thermostat automatically detect the DST periods and adjust the time accordingly.

2) When the Early Start functionality is enabled, the thermostat determines when to start heating in order to obtain the desired temperature by the time set in your schedule.

You will find below the most common issues you may encounter.

If you still need help, contact Sinopé technical support.