Aucun article dans le panier.

Install a non-programmable thermostat for electric heating

Proceed as follows to install your non-programmable thermostat for electric heating

TH1124NP

Install a non-programmable thermostat for electric heating

Proceed as follows to install your non-programmable thermostat for electric heating

Installing your thermostat
on the wall

Make sure you have all the items that are included in the box

  • Non-programmable thermostat for electric heating
  • Installation guide – English version
  • Installation guide – French version
  • 2 mounting screws
  • 2 wire connectors

You will also need:

  • Phillips screwdriver 
  • Wire stripper (optional)
TH1124NP

Follow the installation steps

Here is a detailed step-by-step guide that will take you through the installation of your electric heating non-programmable thermostat.

The installation of this thermostat must be performed by a certified electrician and comply with the national and local electrical codes and regulations.

The warranty does not cover damage to the thermostat due to improper installation. Special CO/ ALR solderless connectors must be used when connecting with aluminum conductors.

1

Make sure that the breakers for your heating system are off at the main electrical panel to avoid any risk of electric shock

2

Unlock and lift the thermostat cover.

3

Use the provided wire connectors to connect the thermostat wires to the wires in the electrical box.

Note: The wires of this thermostat are non-polarized.

Two-wire installation

Four-wire installation

Make sure to firmly tighten the wire connectors for a secure connection. A loose connection can be a fire hazard. 

4

Use the screws provided to install the thermostat to the electrical box.

Replace the cover and lock.

5

Power up the thermostat.

After switching on the breakers, your Sinopé thermostat should turn on automatically.

Rechercher

You will find below the most common issues you may encounter.

If you still need help, contact Sinopé technical support.

Problem solved !