Detects the connected load
Selection of the length of the control cycle according to the type of load connected to the thermostat.
Temperature displayed in °C or °F
Allows control of the ambient temperature taking into account the minimum and maximum temperature limits of the floor
Allows control of the floor temperature taking into account the maximum ambient temperature limit
* These features are available in Neviweb and require the use of the GT130 gateway. Features may vary from platform to platform.
Create automations that run based on time, sunrise/sunset, device action, or your presence
Activate personalized ambiances according to the time of the day, events or activity
See your consumption and savings in real-time
Trigger actions based on your presence
Works with Amazon Alexa and Google Assistant
Operating voltage: 24 Vac*
Main output: 1 A
Auxiliary output: 1 A
Setpoint range: 5 °C to 36 °C (41 °F to 97 °F)
Display range: 0 °C to 70 °C (32 °F to 99 °F)
Storage:-20 °C to 50 °C (-4 °F to 122 °F)
Resolution: ± 0.5 °C (± 1 °F)
Compatible sensor: 10 K Ω / 12 K Ω at 25 °C
Floor sensor not included
* External 24 Vac power required.
A relay may be required when used with a hydronic underfloor heating system, a hydronic heating system or a furnace (without fan control).
Protocol: Zigbee 3.0
Frequency: 2.4 GHz
Transmission power: +20 dBm
Receiver sensitivity: -108 dBm
Encryption key: AES-128
Output for controlling an auxiliary heating system
Protection of the hydronic system pump during long periods of inactivity
Height: 12.2 cm (4.8 po)
Width: 7.2 cm (2.88 po)
Depth: 2.6 cm (1.02 po) + 0.76 cm (0.3 po)