Menu
Proceed as follows to install your light switch or dimmer
Proceed as follows to install your light switch or dimmer
Our installation video will guide you through the steps to install your lighting device.
Here is a detailed step-by-step guide that will take you through the installation of your smart light switch or dimmer.
The installation of this light switch should be made by a certified electrician and must be installed in conformity with the national and local Electrical Codes.
The warranty does not cover damage to the thermostat due to improper installation.
A neutral wire is required. If your electrical panel does not have a neutral wire, you can either add one or install the switch in a different location.
Make sure that the device’s breaker is off at the main electrical panel, then remove the old device.
Use the provided connectors to connect the wires as follows:
Red → Load |
Black → Line |
White → Neutral |
Blue → None* |
*Note: For a single pole installation, do not remove the label on the blue wire.
Make sure to firmly tighten the wire connectors for a secure connection. A loose connection can be a fire hazard. Special CO/ALR solderless connectors must be used when connecting with aluminum conductors.
Use the provided screws to secure the light switch to the electrical box. Then, replace the wall plate.
Power up the device.
Sinopé light switches and dimmers are compatible with 3-way installations. Follow the installation steps.
You can now start configuring your device.
You will find below the most common issues you may encounter.
If you still need help, contact Sinopé technical support.
Ce site est offert dans d'autre langue. Veuillez choisir votre préférence.