Switch and dimmer – Resetting the communication with the gateway

Here are the steps to follow to reset the communication of your Zigbee switches and dimmers (SW2500ZB, DM2500ZB and DM2550ZB) with the GT130 gateway.

1

Hold the ON and OFF buttons on the switch or dimmer simultaneously until the LED flashes red three times.

Add a device in the Neviweb app
2

Add the device back into Neviweb by following the steps of the installation wizard.

Add a DM2550ZB dimmer >

Add a DM2500ZB dimmer >

Add a SW2500ZB switch >

Here are the steps to follow to reset the communication of your Mi-Wi switches and dimmers (SW2500RF and DM2500RF) with the GT125 gateway.

1

Disconnect the power supply from the GT125.
 

2

Press the top button of the switch / dimmer for 10 seconds or until the LED flashes yellow.

3

Release the button and press it again for 10 seconds or until the LED flashes red.

4

Release the button, the LED will go out.

5

Reconnect the GT125’s power supply.

Look for more topics