Configure your ductless heat pump
interface HP6000ZB-GE

Learn how to customize your ductless
heat pump interface

Configure your ductless heat pump interface
HP6000ZB-GE

Learn how to customize your ductless
heat pump interface

Heat pump interface in Neviweb
paramètres
État du thermostat
Termpérature actuelle
Termpérature de consigne
Historique de consommation énergétique
Actual temperature

Current temperature

The temperature detected by the heat pump.

Temperature setpoint

Set temperature

The temperature you want to reach in the room. You can increase or decrease the setpoint by pressing the arrows.

Heat pump icon

Heat pump status

The graphic representation of the state of the heat pump. This is where you can see if the heat pump is activated.

When the heat pump is not activated, the yellow line changes to teal.

Ductless heat pump interface settings

This is where you can customize and modify the various heat pump interface settings, which are explained to you later.

automation

Automations

Here you can view the automations containing this device.

Heat pump modes

Modes

You can select different modes for your ductless heat pump: cool, heat, dry, fan and OFF.*

Heat pump fan intensity

Fan

You can choose the fan intensity from various options: high, medium, low, auto.*

Louvers orientation

Louvers

You can select the louver inclination according to the options offered on your heat pump.

*Options may vary depending on the model of heat pump used.

The settings

Customize the ductless heat pump interface display in Neviweb

When you have multiple ductless heat pump interface in one location, it can be handy to rename or assign them to a particular room.

This function can also be very useful if you use voice assistants like Google Assistant or Alexa.

To do this, you must access the heat pump interface settings by pressing the icon in Neviweb.

Display settings

Settings
Description
Name
Corresponds to the name that will be given to the device in Neviweb
Room
This selection allows devices to be grouped by room to facilitate identification and management.
Add to favorite
Add this device to favorites accessible from the app dashboard

Customize the heat pump interface settings in Neviweb

It is in the settings section that you can customize your use of the ductless heat pump interface by configuring the various settings.

It is also in the settings section that you can activate the interlocking feature.

Configuration settings

Settings
Description
Options
Ductless heat pump model
Description

Allows you to select the model of your ductless heat pump to display only its available options

Options
Temperature unit
Description

Temperature format featured on the thermostat display

Options
Fahrenheit
Celsius
Ignore remote
Description

Allows you to ignore the device’s remote

Options
Yes
No
Max. cooling setpoint
Description

Maximum cooling setpoint temperature available for the thermostat

Options
16 °C to 30 °C
Default: 30 °C
Min. cooling setpoint
Description

Minimum cooling setpoint temperature available for the thermostat

Options
16 °C to 30 °C
Default: 16 °C
Max. heating setpoint
Description

Maximum heating setpoint temperature available for the thermostat

Options
16 °C to 30 °C
Default: 30 °C
Min. heating setpoint
Description

Maximum heating setpoint temperature available for the thermostat

Options
16 °C to 30 °C
Default: 16 °C
Ductless heat pump display
Description

The display on the ductless heat pump

Options
On
Off

Interlocking parameter in Neviweb

The mode chosen for your heat pump will influence the status of the selected thermostats.

If your heat pump is in cooling mode, the thermostats will be disabled.

Settings
Description
Options
Interlocking
Description

Prevents heating and cooling from running at the same time by selecting electric heating thermostats that are activated or deactivated according to heat pump mode

Options
Parameter enabled

Parameter disabled

You will find below the most common issues you may encounter.

If you still need help, contact Sinopé technical support.