Connect your SP2610ZB smart in-wall oultlet to your compatible Zigbee system
Connect your SP2610ZB smart in-wall oultlet to your compatible Zigbee system
1
Start the connectivity session for your compatible Zigbee gateway by referring to its installation guide.
2
Connect the smart in-wall outlet to your network by pressing and holding the manual switch button.
The connection status light:
Blinks green: the outlet is connecting
Green: connected
Note: If the smart outlet can not reach the gateway network after one minute, reset it and try again.
3
Connect all your devices the same way, by going to the next closest device.
4
When all your devices are connected, close the connectivity session of your compatible Zigbee gateway.
Next step
See detailed steps for adding the smart in-wall outlet to your gateway