Connect your SP2610ZB smart wall plug to your compatible Zigbee system
Connect your SP2610ZB smart wall plug to your compatible Zigbee system
1
Start the connectivity session of your compatible Zigbee gateway by referring to its installation guide.
2
Connect your smart wall socket to your network by pressing and holding the manual switch button.
The connection status indicator:
Flashing green: the plug is connected
Green: connected
Note: If the smart plug fails to join the gateway network after one minute, reset it and try again.
3
Connect all your compatible Zigbee devices in the same way, by going to the nearest device.
4
When all your devices are connected, close the connectivity session of your compatible Zigbee gateway.
Next step
See the detailed steps for adding the smart wall plug to your gateway