[render_menu Professionnels]
[render_menu "Service client"]
[render_menu "En savoir plus"]
[detecteur_de_langue]
Recherchez d'autres sujets
[ivory-search id="43527" title="Thermostats"]
Learn how to customize your thermostat
Mi-Wi (Legacy) low voltage
Learn how to customize your thermostat
Mi-WI (Legacy) low voltage
The temperature detected by
the thermostat
The temperature you wish to achieve in the room. You can increase or decrease the setting by pressing the arrows.
The graphical representation of the thermostat’s status. This is where you can see if the thermostat is currently heating.
The thermometer level represents the heating period of the thermostat.
When the thermostat is not in heating mode, the color of the thermostat changes to turquoise.
This is where you can customize and modify the various thermostat settings, which are explained later.
You can view the energy consumption graph for this device here.
You will find more details on consumption graphs in this article:
Your Mi-Wi thermostat is programmed by setting schedules.
You can program up to six periods per day.
You can select different modes for your Mi-Wi thermostat: automatic, manual, off and frost protection.
See what the properties of each of these modes are.
When you have multiple thermostats in the same location, it can be useful to rename your thermostat or assign it to a particular room.
This feature can also be very useful if you use voice assistants like Google Assistant or Alexa.
To do this, you need to access the thermostat settings by pressing the icon
in the thermostat screen.
It is also in the settings section that you can change the information that appears on the thermostat screen as well as the backlighting.
Several other configuration parameters allow you to control the actions that can be physically performed on the thermostat, such as locking the keypad and setting maximum and minimum setpoints.
The connected load (in watts) detected by the thermostat is also displayed in the settings configuration section.
The information displayed in the secondary area of the device screen
The temperature format displayed on the thermostat screen
The time format displayed by the device
Always on:
The screen backlight is always on and its intensity adjusts according to the ambient light.
Upon request:
The backlight turns on when you press the thermostat buttons and turns off after 12 seconds.
Early start only works in automatic mode. When activated, the thermostat determines the time to activate the heating so that the desired temperature is reached at the programmed time.
Enables or disables the device buttons
The maximum setpoint temperature available on the thermostat
The minimum setpoint temperature available on the thermostat
The setpoint temperature assigned to the thermostat when the location is in absence mode.
The power in watts of the electrical load connected to the device. This value is read automatically by some devices and is used to assess energy consumption.
Control mode using floor or ambient temperature.
The maximum floor temperature limit when in ambient control mode.
The minimum floor temperature limit when in ambient control mode.
The maximum ambient temperature limit when in floor control mode.
Allows you to select the length of the control cycle according to the type of load connected to the thermostat.
Note: If you are using a water system with a long start-up time, you will need to select a longer cycle time.
Allows you to select the length of the control cycle according to the type of load connected to the thermostat.
Note: If you are using a water system with a long start-up time, you will need to select a longer cycle time.
This setting determines the minimum time the thermostat can take to activate the heating. If you have a gas, oil, or gas heating system, select the minimum time required to heat the water or air in your system.
This setting determines the minimum time required before the thermostat can restart a heating cycle.
If the thermostat does not heat for an extended period (for example, in summer), this function activates the main output for 1 minute every 24 hours to prevent the pump in a hydronic system from seizing up. This function prevents the pump from seizing.
The floor sensor supplied with compatible Neviweb thermostats is 10 kΩ. If you are replacing a thermostat from another manufacturer, check the sensor’s resistance at 25°C. Our thermostats are compatible with 10 kΩ and 12 kΩ floor sensors at 25°C.
Enter the wattage of the heating appliance connected to the thermostat’s auxiliary output. The modified value is used solely for calculating consumption statistics and does not affect the thermostat’s performance.
It is possible to receive certain types of alerts by email when your thermostat detects certain anomalies.
An alert message is sent when the floor temperature drops below 5°C.
An alert message is sent when the ambient temperature drops below 5°C.
You can now start programming your thermostat and setting schedules.
Find below the problem you are experiencing to know what to do.
If you still need help , contact Sinopé technical support.