How to reset your Mi-Wi lighting device with the Sinopé GT125 gateway

To reset communication between Mi-Wi switches and dimmers and the GT125 gateway, unplug the GT125, press and hold the switch/dimmer button for 10 seconds until it flashes yellow, release, then press and hold again for 10 seconds until it flashes red, release until the LED turns off, then plug the GT125 back in. Applicable models: SW2500RF, DM2500RF.

Here are the steps to reset the communication between your Mi-Wi switches and dimmers and the GT125 gateway.

  1. Disconnect the power supply from the GT125.
  2. Press the top button of the switch/dimmer for 10 seconds or until the LED flashes yellow.
  3. Release the button and press it again for 10 seconds or until the LED flashes red.
  4. Release the button, the LED will turn off.
  5. Reconnect the power supply to the GT125.

Product models associated with this article:

  • (Mi-Wi) SW2500RF, DM2500RF

Was this article helpful to you?

  • Yes
  • No
Tagged