Procedure for changing the control mode of a thermostat for underfloor heating
Procedure for changing the control mode of a thermostat for underfloor heating
Thermostats for underfloor heating offer two control modes: Floor mode and Ambient mode.
Floor mode allows control of floor temperature by means of an external temperature probe with the possibility of limiting the ambient temperature.
Note: The line under the thermometer in the Neviweb application indicates that the thermostat is in floor mode.
Ambient mode allows for room temperature control based on the minimum and maximum floor temperature limits. In other words, the thermostat controls the room temperature via the floor. Once the floor temperature reaches its maximum limit, if the desired room temperature is not reached, the auxiliary output activates the auxiliary heater to achieve the set temperature.
Here is the procedure to change the control mode of a
thermostat for underfloor heating:
From the dashboard, tap the center icon at the bottom of the screen to access your device list.
Once in the list of your devices, select your underfloor heating thermostat.
Tap the settings icon from your thermostat, then on Advanced .
Use the drop-down menu in the Control Mode section to select the desired mode. Save .
Recherchez d'autres sujets
Find below the problem you are experiencing to know what to do.
If you still need help , contact Sinopé technical support.