Configure your switch
SW2500ZB
Learn how to customize your switch
smart Zigbee
Configure your switch SW2500ZB
Learn how to customize your switch
smart Zigbee
Switch control
Press ON/OFF to turn charging on and off.
Switch state
The graphical representation of the switch’s state. This is where you can see if the switch is currently in operation.
The color of the bulb represents the state of the switch.
When the switch is not in use, the color of the bulb changes to grey.
Switch settings
This is where you can customize and modify the various switch settings, which are explained later.
Usage history
You can view the usage graph in minutes for this device here.
You will find more details on consumption graphs in this article:
The SETTINGS
Customize the switch display in Neviweb
When you have multiple dimmers and switches in the same location, it can be convenient to rename them or assign them to a particular room.
This feature can also be very useful if you use voice assistants like Google Assistant or Alexa.
To do this, you need to access the switch settings by pressing the icon
in the thermostat screen.
Display settings
Customizing the switch in Neviweb
It is also in the settings section that you can adjust the color of the LED indicator on the switch.
Several other configuration settings allow you to control the actions that can be physically performed on the switch, such as locking the keyboard and setting a timer.
Configuration settings
The timer determines the operating time of the device. When the set time has elapsed, the device is automatically switched off.
1 min
2 min
5 min
10 min
15 min
30 min
1 hour
2 hours
3 hours
Enables or disables the device buttons
Locked
This setting allows you to change the color of the indicator light on the switch when the load is off (OFF).
Lime
Pearl
Amber
Blue
This setting allows you to turn off or adjust the brightness of the switch indicator light when the load is off. Use this function as a nightlight or to locate the switch in the dark.
5% to 100%
This setting allows you to change the color of the indicator light on the switch when the load is activated (ON).
Lime
Pearl
Amber
Blue
This setting allows you to turn off or adjust the intensity of the indicator light on the switch when the load is activated (ON).
5% to 100%
Configuration settings (connected to the Sedna valve)
Double-clicking the top of the switch will open the valve.
Double-clicking the bottom of the switch will close the valve.
Next step
You can now start programming your switch and creating automations.
Recherchez d'autres sujets
Find below the problem you are experiencing to know what to do.
If you still need help , contact Sinopé technical support.
The indicator light flashes blue, then turns off when I connect the switch/dimmer to my compatible Zigbee gateway.
My device is inaccessible on Neviweb.
The indicator light (LED) flashes red when connecting the device to the gateway.
Why has the consumption history of my SW2500ZB switch and DM2500ZB dimmer been reset?