What are the differences between the Sinopé water leak detector models?

Features common to all models

All Sinopé water leak detectors offer the following features:

• Rapid detection of the presence of water (from ~0.4 mm)
• Détection en cas de risque de gel
• Notifications (email, push) in case of leaks, risk of freezing, or low battery.
• Built-in audible alarm
• Integration with the Sinopé Neviweb application
• Option to trigger the automatic closure of the smart water valve
• Battery operated (up to several years of battery life depending on the installation)
  
  

The different models and their specific features

1. Standard detectors: ideal for simple detection at a specific point (e.g., under the sink, near the toilet or shower)

• WL4210 (2nd generation)*
  • Dual detection: in addition to the electrodes under the device, it is possible to connect a remote 4-foot probe or a perimeter cable via the port provided for this purpose.
• WL4200 (1st generation)
  • Simple protection: electrodes directly under the device
    
    

2. Detectors with remote probe: ideal for confined or hard-to-reach places (e.g., under the dishwasher, under the washing machine)

• WL4210S (2nd generation)*, WL4200S (1st generation)
  • 4-foot external probe connected to the detector
  • Submersible probe in water
    
    

3. Detectors with perimeter cable: ideal for covering a large area (e.g., around the water heater)

• WL4210C (2nd generation)*, WL4200C (1st generation)
  • 7-foot cable connected to the detector
  • Detection along its entire length
    

*Second-generation detectors are not compatible with first-generation Sinopé valves (VA4200WZ, VA4201WZ).

Product models associated with this article:

• WL4210, WL4210S, WL4210C, WL4200, WL4200S, WL4200C