How do I calculate my Sinopé thermostat’s power needs?
To choose a Sinopé thermostat, add up the wattage of every heating device it will control (baseboards, convectors, etc.), then pick a model whose maximum load is equal to or greater than that total. The wattage is shown on each device’s label; for a 240 V baseboard, you can also estimate it at 250 W per foot. Sinopé line-voltage triac thermostats have a built-in safety margin: a 3,000 W thermostat can safely control a total load of 3,000 W.
Can I connect several heating devices to one Sinopé thermostat?Peut-on brancher plusieurs appareils de chauffage sur un seul thermostat Sinopé?
Yes. A Sinopé thermostat can control several baseboard heaters or convectors, as long as their combined wattage does not exceed its maximum load. This is common in open areas, such as a kitchen, living room or dining room on the same thermostat. Start by identifying every heating device connected to that thermostat.
How do I calculate the total power of my heating devices?Comment calculer la puissance totale de mes appareils de chauffage?
The wattage of a baseboard heater or convector is usually printed on the manufacturer’s label attached to the device.
If the label is unreadable, estimate it with this rule, valid only for a 240 V installation: wattage (W) = 250 W × baseboard length (in feet). For example, a 6-foot baseboard draws 6 × 250 W = 1,500 W.
This rule does not apply to 120 V installations.Cette règle ne s’applique pas aux installations à 120 V.
| Baseboard length | Wattage at 240 V |
|---|---|
| 2 ft | 500 W |
| 3 ft | 750 W |
| 4 ft | 1000 W |
| 5 ft | 1250 W |
| 6 ft | 1500 W |
| 8 ft | 2000 W |
| 10 ft | 2500 W |
How do I choose the right wattage of Sinopé thermostat?
Add up the wattage of every heating device on the thermostat, then choose a Sinopé thermostat whose maximum load is equal to or greater than that total. For example, two 6-foot baseboards (2 × 1,500 W = 3,000 W) need a thermostat rated for at least 3,000 W.
Can a Sinopé thermostat run at 100% of its maximum load?
Yes. Sinopé line-voltage triac thermostats are designed with a built-in safety margin and can safely handle their rated maximum load. A 3,000 W thermostat is therefore suitable for a total load of 3,000 W, and a 4,000 W thermostat for a 4,000 W load.
Product models associated with this article :
- (Wi-Fi) TH1123WF, TH1124WF, TH1133WF, TH1134WF, TH1133CR, TH1134CR, TH1143WF, TH1144WF, TH1500WF
- (Zigbee) TH1123ZB, TH1124ZB, TH1134ZB/HC, TH1500ZB
- (Autres) TH1120RF, TH1121RF, TH1120P, TH1120, TH1124NP
Was this article helpful to you?
- Yes
- No