How do I calibrate my adaptive phase dimmer according to load?

Here are the steps to calibrate your smart adaptive phase dimmer according to load:

  1. First, ensure the load is OFF, and then press and hold the
    bottom button for 9-10 seconds until the load turns ON.
  2. Release the bottom button and let the dimmer perform its
    calibration routine. This will determine the optimum
    parameters for the connected load type.
  3. Perform this operation each time the load is changed.
    If you perform a calibration, there is no need to modify
    the “One percent ON Adjustment” property.

Look for more topics

Rechercher