Learn how to customize your Mi-Wi (Legacy)
dimmer
Learn how to customize your Mi-Wi (Legacy)
dimmer
Adjust the brightness level of your dimmer by tapping the arrows.
The graphic representation of the dimmer status. This is where you can see if the dimmer is currently on.
The shade of the bulb represents the percentage of dimming.
When the dimmer is not on, the color of the bulb turns gray.
This is where you can customize and modify the various dimmer settings, which are explained later.
Here you can view the energy consumption graph for this device.
You can find more details on consumption charts in this article:
Programming your Mi-Wi dimmer is done by setting schedules.
You can program up to six periods per day here.
You can select different modes for your Mi-Wi dimmer: automatic or manual.
See what the properties of each of these modes are.
When you have multiple dimmers and light switches in one location, it can be handy to rename them or assign them to a particular room.
This function can also be very useful if you use voice assistants like Alexa.
To do this, you need to access the dimmer settings by tapping the 
icon in the Neviweb dimmer screen.
It is also in the settings section that you can adjust the minimum light intensity and the color of the dimmer LED indicator.
Several other configuration settings allow you to control actions that can be physically taken on the dimmer such as locking the keypad and setting a timer.
The timer determines the operating time of the device when it is manually activated through the app or by physically pressing the device.
The timer is not activated when a change is requested by the automatic mode (e.g., the execution of a schedule).
Select the device’s state when the network is in Away mode.
Inactive
The device ignores the Away mode.
OFF
The device turns off the load.
ON
The device turns on the load.
Automatic
The device is set in auto mode and follows the programmed schedule.
Random
The switch activates and deactivates the load randomly between sunset and midnight to simulate occupancy.
Enable or disable the device’s buttons.
By selecting the minimum light intensity, you can access the desired light intensity more quickly. This may vary depending on the type of bulb used.
This parameter is used to turn off or adjust the intensity of the dimmer’s indicator light when the load is enabled (ON).
This setting is used to turn off or adjust the intensity of the dimmer’s indicator light when the load is disabled (OFF). Use this function as a night light or to locate the dimmer in the dark.
This parameter lets you adjust the color of the switch’s indicator light when the load is disabled (OFF). When the away mode is activated, the indicator light is always green.
The wattage featured in this field corresponds to the electrical load connected to the device. This value is automatically read by some devices and is used to assess the energy consumption.
You can now start programming your dimmer and create automations.
You will find below the most common issues you may encounter.
If you still need help, contact Sinopé technical support.
