Aucun article dans le panier.

.

1

Adding your WL4200 / WL4200S water
leak detector to Neviweb

Find out how to configure your new smart water leak detector using Neviweb app

Adding your WL4200 / WL4200S water leak detector to Neviweb​

Find out how to configure your new smart water leak detector using Neviweb app

Getting started

To configure and use your light switch you will first need to download the latest version of the Neviweb app, available on the App Store or Google Play Store.

You will also need to have previously installed the detector WL4200 or WL4200S, connect the Sinopé GT130 gateway to your Wi-Fi router and ensure that Wi-Fi is activated on your mobile device and that the latter is connected to a Wi-Fi network.

 
1

Go to the Device List page by tapping the middle icon at the bottom of the app.

2

From the Room or All tab, tap + Add device.

3

Select the device to add and follow the steps of the installation wizard.

Next step

You can now customize your water leak detector settings.

You will find below the most common issues you may encounter.

If you still need help, contact Sinopé technical support.

Problem solved !