Learn how to customize your Zigbee
dimmer
Learn how to customize your Zigbee
dimmer
Adjust the brightness level of your dimmer by tapping the arrows.
The graphic representation of the dimmer status. This is where you can see if the dimmer is currently on.
The shade of the bulb represents the percentage of dimming.
When the dimmer is not on, the color of the bulb turns gray.
This is where you can customize and modify the various dimmer settings, which are explained later.
Here you can view the energy consumption graph for this device.
You can find more details on consumption charts in this article:
When you have multiple dimmers and light switches in one location, it can be handy to rename them or assign them to a particular room.
This function can also be very useful if you use voice assistants like Google Assistant or Alexa.
To do this, you need to access the dimmer settings by tapping the icon in the Neviweb dimmer screen.
It is also in the settings section that you can adjust the minimum light intensity and the color of the dimmer LED indicator.
Several other configuration settings allow you to control actions that can be physically taken on the dimmer such as locking the keypad and setting a timer.
The timer determines the operating time of the device. When the set time has elapsed, the device is automatically switched off.
Enables or disables the device’s buttons
By selecting the minimum light intensity, you can access the desired light intensity more quickly. This may vary depending on the type of bulb used.
This setting allows you to modify the color of the dimmer’s indicator light when the load is deactivated (OFF)
This setting is used to turn off or adjust the intensity of the dimmer’s indicator light when the load is disabled (OFF). Use this function as a night light or to locate the dimmer in the dark.
This parameter allows you to modify the color of the dimmer’s indicator light when the load is enabled (ON)
This parameter is used to turn off or adjust the intensity of the dimmer’s indicator light when the load is enabled (ON).
Double-clicking on the top of the dimmer will open the valve.
Double-clicking on the bottom of the dimmer will close the valve.
You can now start programming your dimmer and create automations.
You will find below the most common issues you may encounter.
If you still need help, contact Sinopé technical support.
Ce site est offert dans d'autre langue. Veuillez choisir votre préférence.