Learn how to customize your thermostat
Mi-Wi (Legacy) for electric floor heating
Learn how to customize your thermostat
Mi-Wi (Legacy) for electric floor heating
The temperature detected by
the thermostat
The temperature you want to reach in the room. You can increase or decrease the setpoint by pressing the arrows.
The graphic representation of the state of the thermostat. This is where you can see if the thermostat is currently heating up.
The thermometer level represents the heating period of the thermostat.
When the thermostat is not heating, the thermostat color changes to teal.
This is where you can customize and modify the different thermostat settings which are explained to you later.
Here you can view the energy consumption graph for this device.
You can find more details on consumption charts in this article:
Programming your Mi-Wi thermostat is done by setting schedules.
You can program up to eight periods per day here.
You can select different modes for your Mi-Wi thermostat: manual, automatic, standby and frost safe.
See what the properties of each of these modes are.
When you have multiple thermostats in one location, it can be handy to rename your thermostat or assign it to a particular room.
This function can also be very useful if you use a voice assistant like Alexa.
To do this, you must access the thermostat settings by pressing the 
icon on the thermostat screen.
It is also in the settings section that you can modify the information that appears on the thermostat screen as well as the backlight.
Several other configuration settings allow you to control actions that can be physically performed on the thermostat, such as locking the keypad and establishing maximum and minimum set points.
The connected load (in watts) detected by the thermostat is also displayed in the settings configuration section.
The information displayed in the secondary area of the device screen
The temperature format displayed on the thermostat screen
The time format featured on the thermostat display
Always ON:
The display backlight is always on, and its intensity adjusts according to the ambient light.
On Demand:
The backlight turns on when you press the thermostats buttons and turns off after 12 sec.
The early start functionality can bu used only in Automatic mode. When enabled, the thermostat determines when to start heating to obtain the desired temperature by the time set in your schedule.
Enables or disables the device’s buttons
The maximum setpoint temperature available on the thermostat
The minimum setpoint temperature available on the thermostat
The setpoint temperature assigned to the thermostat when the away mode is activated
The power in watts of the electrical load connected to the device. This value is read automatically by the thermostat and is used to assess energy consumption.
Your thermostat allows you to choose the control mode and several advanced parameters such as the control of a 2nd stage of heating.
Control mode using floor or ambient temperature.
The maximum floor temperature limit of the floor when in ambient control mode.
The minimum floor temperature limit when in ambient control mode.
The maximum ambient temperature limit when in floor control mode.
Expansion unit
When the electrical load exceeds the thermostat’s capacity, the auxiliary output allows you to add extra power to the system through a TR1310 expansion unit.
In ambient mode, the auxiliary output may be used as a second heating stage when the floor has reached its maximum temperature, and the setpoint cannot be reached with the floor only.
2nd stage really
When the auxiliary heater is controlled from an electromechanical relay or the auxiliary heat source is equipped with a fan.
2nd stage SSR
When the auxiliary heater is an electrical resistance (baseboard) and is controlled through an electronic relay (SSR).
The floor sensor supplied with Neviweb compatible thermostats is 10 K Ω. If you are replacing a thermostat from another manufacturer, verify the value of the probe at 25 ° C. Our thermostats are compatible with 10 K Ω and 12 K Ω floor sensors at 25 ° C.
Enter the power in watts of the heater connected to the auxiliary output of the thermostat. The modified value is only used to calculate consumption statistics and does not affect the performance of the thermostat.
It is possible to receive certain types of alerts by email when your thermostat detects certain anomalies.
An alert message is sent when the floor temperature drops below 5 ° C.
An alert message is sent when the ambient temperature drops below 5 ° C.
This alert message is sent when a GFCI fault has been detected.
You can now begin to program your thermostat and set schedules.
You will find below the most common issues you may encounter.
If you still need help, contact Sinopé technical support.
Ce site est offert dans d'autre langue. Veuillez choisir votre préférence.
