Configure your thermostat
TH1123WF / TH1124WF
Learn how to customize your smart
thermostat for electric heating
Configure your thermostat
TH1123WF / TH1124WF
Learn how to customize your smart
thermostat for electric heating
Current temperature
The temperature detected by
the thermostat
Set temperature
The temperature you want to reach in the room. You can increase or decrease the setpoint by pressing the arrows.
Thermostat status
The graphic representation of the state of the thermostat. This is where you can see if the thermostat is currently heating up.
The thermometer level represents the heating period of the thermostat.
When the thermostat is not heating, the thermostat color changes to teal.
Thermostat settings
This is where you can customize and modify the various thermostat settings, which are explained to you later.
Energy consumption history
Here you can view the energy consumption graph for this device.
You can find more details on consumption charts in this article:
Schedules
Programming your Wi-Fi thermostat is done by setting schedules.
You can program up to eight periods per day here.
Modes
You can select different modes for your Wi-Fi thermostat: automatic, manual and off.
See what the properties of each of these modes are.
THE SETTINGS
Customize the thermostat display in Neviweb
When you have multiple thermostats in one location, it can be handy to rename your thermostat or assign it to a particular room.
This function can also be very useful if you use voice assistants like Google Assistant or Alexa.
To do this, you must access the thermostat settings by pressing the icon on the thermostat screen.
Display settings
Customize the thermostat screen in Neviweb
It is also in the settings section that you can modify the information that appears on the thermostat screen as well as the backlight.
Several other configuration settings allow you to control actions that can be physically performed on the thermostat, such as locking the keypad and establishing maximum and minimum set points.
The connected load (in watts) detected by the thermostat is also displayed in the settings configuration section.
Configuration settings
The information displayed in the secondary area of the device screen
Outside Temp.
Automatic
The temperature format displayed on the thermostat screen
Fahrenheit
The time format featured on the thermostat display
Always ON:
The display backlight is always on, and its intensity adjusts according to the ambient light.
On Demand:
The backlight turns on when you press the thermostats buttons and turns off after 12 sec.
On Demand
The early start functionality can bu used only in Automatic mode. When enabled, the thermostat determines when to start heating to obtain the desired temperature by the time set in your schedule.
ON
Enables or disables the device’s buttons
Locked
The maximum setpoint temperature available on the thermostat
30 °C default
The minimum setpoint temperature available on the thermostat
5 °C default
The setpoint temperature assigned to the thermostat when the away mode is activated
The power in watts of the electrical load connected to the device. This value is read automatically by the thermostat and is used to assess energy consumption.
Customize the thermostat configuration
Your thermostat allows you to change the length of the
control cycle depending on the type of heater.
Cycle length depending on the type of heater
It is also possible to change the cycle length directly on the thermostat.
Next step
You can now begin to program your thermostat and set schedules.
Look for more topics
You will find below the most common issues you may encounter.
If you still need help, contact Sinopé technical support.