Menu
- Home
- Water damage protection
- WL4210/WL4210S/WL4210C
- Technical specifications WL4210/WL4210S/WL4210C detectors
* These features are available in the Neviweb app. Features may vary from platform to platform.
Receive an alert by email or push notification as soon as there is water or frost risk *
Please note that if you added your valve to Neviweb before December 15, 2021, you have access to SMS alerts. However, if you eventually decide to disable SMS alerts, there is no going back. You will only receive push notifications and email alerts.
*Requires Sinopé’s 2nd generation smart water valve or a Zigbee compatible system as well as a permanent Internet connection. When connected to the GT130 gateway, the detector only sends an email notification.
Rename your detectors to identify the source of the leak
Check the status of your connected devices and receive an alert when the batteries are low
Power supply: 2 AAA batteries included (lithium)
Operating: 0 °C to 40 °C (32 °F to 104 °F)
Storage: -20 °C to 50 °C (-4 °F to 122 °F)
3-year warranty
Protocol: Zigbee 3.0
Frequency: 2.4 GHz
Transmission power: +20 dBm
Receiver sensitivity: -108 dBm
Possibility to add a water leak probe or a perimeter cable to the detector thanks to the conenction port
WL4210 Detector
Height: 1.91 cm (0.75 in)
Length: 6.37 cm (2.5 in)
Width: 6.37 cm (2.5 in)
WL4210S Detector
Height: 1.91 cm (0.75 in)
Length: 6.37 cm (2.5 in)
Width: 6.37 cm (2.5 in)
Probe
Height: 1.31 cm (0.5 in)
Length: 5.26 cm (2.07 in)
Cable length: 121.92 cm (4 in)
Width: 4.3 cm (1.7 in)
WL4210C Detector
Height: 1.91 cm (0.75 in)
Length: 6.37 cm (2.5 in)
Width: 6.37 cm (2.5 in)
Perimeter cable
Cable length: 7 ft (84 in)
Cable diameter: 5.9 mm
Ce site est offert dans d'autre langue. Veuillez choisir votre préférence.