Display and controls
Non-programmable electric heating thermostat
TH1124NP
Display and controls
Non-programmable electric heating thermostat
TH1124NP
Température ambiante
Affichage secondaire : Température de consigne (Set)
Indicateur de chauffage
↑
↓
Changing advanced settings on the device
To change the thermostat’s settings, you need to:
1
Get the setpoint to its minimum and hold the 
button for 10 seconds to access the menu.
2
Press the 
or button to change the settings.
3
Press the and buttons simultaneously to save and go to the next parameter. Continue to press until the end of the list to exit the menu.
Advanced settings
Order | Name | Parameters & settings | Display |
| 1 | Scale | Temperature scale °C or °F (Default: °F) | °F or °C |
| 2 | Cycle length | Control cycle SHT (short cycle for electric baseboard) | SHT |
| 3 | Setpoint Min | Minimum setpoint 41 °F to 86 °F – (Default: 41 °F) 5 °C to 30 °C | 41 ° |
| 4 | Setpoint Max | Maximum setpoint 41 °F to 86 °F – (Default: 86 °F) 5 °C to 30 °C | 86 ° |
| 5 | Blacklight | Backlight control ON, OFF or BED – (Default: ON) ON (backlight always active, will dim according to ambient light) OFF (will only turn on when a button is pressed) BED (bedroom mode – backlight will dim according to ambient light and will turn OFF below 20% of luminosity) | ON |
OFF Mode
To put your thermostat in OFF mode, you need to:
1
Hold the buttons and for 10 seconds.
2
To exit the OFF mode, hold the buttons and for 10 seconds or raise/lower the setpoint.
Look for more topics
You will find below the most common issues you may encounter.
If you still need help, contact Sinopé technical support.