Aucun article dans le panier.

Technical specifications of your smart dimmer
DM2550ZB

Dimmer FEATURES

DM2550ZB features

Features*

AUTOMATIONS

Create automations that run based on time,
sunrise/sunset, device action, or your presence

SCENES

Activate personalized ambiances according to the time of the day, events or activity

light intensity

Adjust the minimum dimming light intensity to prevent the LED bulbs from flickering

ENERGY REPORTS

See your consumption and savings in real-time

GEOFENCING

Trigger actions based on your presence

VOICE ASSISTANTS

Works with Amazon Alexa and Google Assistant

* These features are available in Neviweb and require the use of the GT130 gateway. Features may vary from platform to platform.

TECHNICAL SPECIFICATIONS

Operating voltage: 120 Vac, 60 Hz

Neutral wire required

MOSFET commutation

Simple installation (3 or 4 wires)

Single pole application, 3-way compatible with switches only

Wall plate not included

3-year warranty

TEMPERATURES

Operating: 0 °C to 40 °C (32 °F to 104 °F)

Storage: -20 °C to 50 °C (-4 °F to 122 °F)

 

MAXIMUM LOAD

 Incandescent & halogen lampsDimmable LED/ELV 
Single installation600 W150 W
Multi-gang (2 units)500 W150 W
Multi-gang (3 units)400 W150 W

communication

Protocol: Zigbee 3.0

Frequency: 2.4 GHz

Transmission power: +20 dBm

Receiver sensitivity: -108 dBm

Encryption key: AES-128

CERTIFICATIONS

Conforms to ANSI/UL Std. 1472

Certified under CAN/CSA Std. C22.2 No184.1

provided connectors

Stripping length: 16 mm

Wires: 22-10 AWG, Cu

Combinations: Max. 2 #12 & 2 #14, Min. 3 #20 Sol.

Forward/reverse phase dimming

Load

Control requirements

Incandescent / halogen lighting

Can be controlled by either forward or reverse phase dimmers.

Dimmable light-emitting diode (LED)

Can be controlled by either forward or reverse phase dimmers. Generally, will perform better in reverse phase due to the characteristics
of the LED drivers.

Electronic low voltage (ELV)

Can only be controlled by reverse phase
dimmers due to potential component damage from “kickback” voltage when current is interrupted in reverse phase.

dimensions

Length: 10.41 cm (4.1 in)

Width: 4.37 cm (1.72 in)

Depth: 2.98 cm (1.18 in)

Problem solved !