Controls and LED status

Smart electrical load controller
RM3250RF / RM3200RF

Controls and LED status

Smart electrical load controller
RM3250RF / RM3200RF

Voyant / Bouton
Bouton principal
Voyant « On »
Voyant « Power »

Manual control

The main button on the controller allows the user to manually turn the connected device ON or OFF by briefly pressing the button. If the controller is in Automatic mode, the new state is temporary and will be resynchronized with the program at the next event.

The Network indicator lights up when the controller is connected to the network.

The ON indicator lights up when the load is ON.

The Power indicator lights up when the contoller is powered.

Mode changing

The smart electrical load controller offers two control modes: manual and automatic. The change the mode, you must hold the main button for 5 seconds. 

When the indicator light is off, the load controller is in manual mode. 

When the indicator light is blue, the load controller is in automatic mode.

When the indicator light flashes blue, the load controller is in temporary mode.

Add your smart load controller to your gateway

You can now connect your load controller to your preferred gateway.

You will find below the most common issues you may encounter.

If you still need help, contact Sinopé technical support.