Connect your SP2600ZB smart plug to your compatible Zigbee system
Connect your SP2600ZB smart plug to your compatible Zigbee system
1
Start the connectivity session for your compatible Zigbee gateway by referring to its installation guide.
2
Connect your smart plug to the network by pressing the ON / OFF button for a few seconds.
The connection status light:
Blinks green: the smart plug is connecting
Green for 5 seconds: connected
Note: If the smart plug can not reach the gateway’s network after 20 seconds, reset it and try again.
3
Connect all your devices the same way, by going to the next closest device.
4
When all your devices are connected, close the connectivity session of your compatible Zigbee gateway.
Next step
See detailed steps for adding the smart plug to your gateway