How do I unlock my Zigbee thermostat?

  1. Unplug the GT130 gateway.
  2. Turn off the thermostat circuit breaker, wait a few seconds and turn it back on.
  3. Wait a few seconds until the lock disappears from the thermostat screen. 
  4. Reset the thermostat:

    A. Press and hold the top button to increase the temperature until the display changes to the menu.

    B. Hold both buttons until CLR appears on the display.

    C. Press the top button once to increase the temperature; the display will change from NO to YES.

    D. Press and release both buttons immediately; DONE will appear on the display and the thermostat will restart.

  5. Reconnect the GT130.
  6. Reconnect the thermostat by clicking on « Add a device » in Neviweb.