Display and controls
Smart thermostat for electric floor heating
TH1300ZB
Display and controls
Smart thermostat for electric floor heating
TH1300ZB
Changing settings from the device
To change the temperature settings or the control cycle, you must:
Lower the setpoint temperature to its minimum and keep the button pressed for 10 seconds to access the menu.
Press the or buttons to change the setting.
Press the and buttons simultaneously to select the next parameter. Continue to press until the end of the list to exit the menu.
Settings that can be changed from the device
# | Name | Parameters & settings |
1 | Load | Load power 0 watt to 3600 watt |
2 | Display | Temperature format °C or °F – (default: °C) |
3 | Control | Control mode A (Air), F (Floor) – (default: F) |
4 | Limit Floor Max | Maximum floor temperature (Visible only in A mode) 5 °C to 36 °C – (default: OFF) |
5 | Aux | Assignment of auxiliary output OFF, EXP, 15 sec, 15 min – (default: OFF) |
6 | Sensor | Floor sensor 10K or 12K – (default: 10K) |
Look for more topics
Add your smart floor heating thermostat to your gateway
You can now move on to configuring your thermostat with your preferred gateway to get more features.
You will find below the most common issues you may encounter.
If you still need help, contact Sinopé technical support.