Display and controls
Smart thermostat for electric floor heating
TH1300RF
Display and controls
Smart thermostat for electric floor heating
TH1300RF
État de connexion avec la passerelle
Heure
Affichage secondaire : Température extérieure (Out)
Température ambiante
↑
↓
Changing settings from the device
To change the temperature settings or the control cycle, you must:
1
Lower the setpoint temperature to its minimum and keep the 
button pressed for 10 seconds to access the menu.
2
Press the or 
buttons to change the setting.
3
Press the and buttons simultaneously to select the next parameter. Continue to press until the end of the list to exit the menu.
Settings that can be changed from the device
|
# |
Name | Parameters & settings |
| 2 | Control |
Control mode A (Air), F (Floor) – (default: F) |
| 3 | Aux |
Assignment of auxiliary output Off, Shrt, Long, Slave – (default: Slave) |
| 7 | Max Floor |
Maximum floor temperature 5 °C to 30 °C – (default: OFF) |
| 9 | Sens |
Floor sensor 10K or 12K – (default: 10K) |
| 11 | Load |
Load power* 0 W to 3600 W |
* Load power
Ther thermostast is equipped with a sensor that can read the load in watts connected to the thermostat.
Look for more topics
Now add your thermostat for floor heating to your favorite platform
You can now move on to configuring your thermostat with your gateway to get more functionality.
You will find below the most common issues you may encounter.
If you still need help, contact Sinopé technical support.