Follow these steps to install your smart double-pole thermostat
Follow these steps to install your smart bipolar thermostat
Notre vidéo d’installation vous guidera à travers les étapes d’installation de votre thermostat.
Here is a detailed step-by-step guide that will take you through the installation of your double-pole thermostat for electric heating.
The installation of this thermostat must be performed by a certified electrician and comply with the national and local electrical codes and regulations.
The warranty does not cover damage to the thermostat due to improper installation.
Make sure that the breakers for your heating system are off at the main electrical panel to avoid any risk of electric shock
Unlock and lift the thermostat cover.
Use the provided connectors to connect the load/line wires located on the back of the thermostat.
Make sure to firmly tighten the wire connectors for a secure connection. A loose connection can be a fire hazard.
Use the provided screws to secure the thermostat base to the electrical box.
Replace the cover and lock.
Power up the thermostat.
After switching on the breakers, your Sinopé thermostat should turn on automatically.
You can now start configuring your thermostat.